014-FMCHYD210 ACE hydraulic motor driven centrifugal pump

$1,369.00
In stock
SKU
014-FMCHYD210
For Load Sensing Closed Center Systems | Open Center Systems Up To 17gpm Using Internal Needle Valve Bypass. Motor Requires 10 Gpm Hydraulic Fluid Input.
Weight: 27.000000
014-FMCHYD210 ACE hydraulic motor driven centrifugal pump

This ACE hydraulic motor driven centrifugal pump, FMC-HYD-210, can be mounted in a variety of places and will not tie up your PTO or engine drive shaft. It requires a minimum of 8 GPM hydraulic input and is Roundupready.

Interchange Numbers:
FMCHYD210, 014FMCHYD210, 2336014-FMCHYD210, FMC HYD 210

Product Features:

Features:

  • The farm industry standard since 1969.

  • The 202 and 203 motors require 2 GPM (7.6 LPM) and 3 GPM (11.4 LPM) hydraulic fluid input. Recommended for engineered systems with limited oil flow.

  • The 204 motor requires 4 GPM(15.1 LPM) maximum hydraulic fluid input.

    Recommended for:

    • Pressure Compensating Closed Center Systems
    • Open Center Systems up to 13 GPM (49.2 LPM) using internal needle valve bypass.
  • The 206 motor requires 7 GPM (26.5 LPM) maximum hydraulic fluid input and fits virtually all tractor hydraulic systems.

    Recommended for:

    • Pressure Compensating Closed Center Systems
    • Load Sensing Closed Center Systems
    • Open Center Systems up to 16 GPM (60.6 LPM) using internal needle valve bypass
  • The 210 motor requires 10 GPM (37.9 LPM) maximum hydraulic fluid input.

    Recommended for:

    • Load Sensing Closed Center Systems
    • Open Center Systems up to 17 GPM (64.4 LPM) using internal needle valve bypass.
  • The 310 motor requires 16 GPM (60.6 LPM) maximum hydraulic fluid input.

    Recommended for:

    • Large Open Center Systems up to 24 GPM (90.9 LPM) using internal needle valve bypass.
Write Your Own Review
You're reviewing:014-FMCHYD210 ACE hydraulic motor driven centrifugal pump
Your Rating