014-FMC150HYD206-ACE hydraulic motor driven centrifugal pump
$1,404.00
In stock
SKU
014-FMC150HYD206
1.5 Inch Inlet X 1.25 Inch Outlet Npt Ports. For Pressure Compensating Closed Center Systems | Load Sensing Closed Center Systems | Open Center Systems Up To 16 Gpm
Weight: 31.000000
ACE hydraulic motor driven centrifugal pump
The ACE hydraulic motor driven centrifugal pump is an ideal sprayer pump because it has mounting versatility and does not tie up your PTO or engine drive shaft. This sprayer pump requires a minimum of 7 GPM hydraulic input. It has a 1-1/2 in. suction and a 1-1/4 in. discharge. The pump is constructed to be corrosion resistant and is RoundUpready.
Interchange Numbers:
FMC150HYD206, 2336FMC150HYD206, 49920
Product Features:
The ACE hydraulic motor driven centrifugal pump is an ideal sprayer pump because it has mounting versatility and does not tie up your PTO or engine drive shaft. This sprayer pump requires a minimum of 7 GPM hydraulic input. It has a 1-1/2 in. suction and a 1-1/4 in. discharge. The pump is constructed to be corrosion resistant and is RoundUpready.
Interchange Numbers:
FMC150HYD206, 2336FMC150HYD206, 49920
Product Features:
Features:
Provides higher pressure and greater volume for applications with large tanks and longer spray booms.
The 206 motor requires 7 GPM (26.5 LPM) maximum hydraulic fluid input and fits virtually all tractor hydraulic systems.
Recommended for:
- Pressure Compensating Closed Center Systems
- Load Sensing Closed Center Systems
- Open Center Systems up to 16 GPM (60.6 LPM) using internal needle valve bypass
Write Your Own Review